Este debate contiene 3 respuestas, tiene 4 mensajes y lo actualizó  joftr 06/01/2017 at 08:12.

1
3
681
  • Verificado

    Hi experts,

    I have 3 questions in conjunction with temperature probe 3455:

    1. Is it possible to use the radio temperature outdoor probe (3455) and the corresponding interface (N4577) directly in MH202 "Only if condition", so that a screnario will only start, when the temperature has a defined value?

    2. Is it possible, to display the outdoor temperature (based on 3455) along with the indoor temperature (based on N4693) on my LN4890 touchscreen?

    3. Is there also a wired outdoor probe as an alternative for item 3455?

    Thank you in advance.




    Usuario
    hleopoldseder
    Papel
    Estudiante
    19 posts
    Verificado

    Hi, the answers at you first 2 question are YES.

    About the 3rd one we don't have any external wired probe.

    Regards




    Usuario
    BT_Marcog
    Papel
    Legrand/BTicino Group
    4593 posts
    Verificado

    can an indoor probe be used as outside wired probe ?




    Usuario
    sxpertle
    Papel
    Integrador de sistemas
    606 posts
    Verificado

    Hi sxpertle,

    if you are referring to indoor probes *4693, *4692 etc. I would say: no, cannot be used outside. At least for most parts of our world, the effective range of 3 to 40 °C is not enough … And I guess they are not certified for outdoor usage (general durability, water prove …).




    Usuario
    joftr
    Papel
    Apasionado
    132 posts
Viendo 4 publicaciones - del 1 al 4 (de un total de 4)

Debe estar logueado para responder a este tema.