Home Page Forums Community International FAQ MyOPEN community error F430/4 with zone in 4 pipes fancool system

MyOPEN community
error F430/4 with zone in 4 pipes fancool system

This topic contains 1 reply, has 1 voice, and was last updated by  nguyenvantruc 05/05/2019 at 14:52.

0
1
118
  • Verified

    Hello!

    I have a problem : Now zone 4:  I settemp at 20°c  for zone 4 but F430/4 not turn on Valve and Fancool.

    8:29:31 PM: *#4*4*0*0263## (measure 26.3°c on zone 4)

    8:29:31 PM: *#4*4*12*0200*3## (setpoint  20°c on zone 4 mode Generic)

    8:29:31 PM: *4*0*4##

    8:29:31 PM: *#4*4*14*0200*3## (expected 20°c on zone 4 mode Generic)

    8:29:32 PM: *#4*4*13*00## (local offset knob value 0 on Zone 4)

    8:29:39 PM: *#4*4*19*0*0## (valve zone 4 cooling OFF heating OFF)

    8:35:11 PM: *#4*4#1*20*5##  (off fancoil)

    Can you help me!

     




    User
    nguyenvantruc
    Role
    Installer
    7 posts
    Verified

    Hello!

    Can you see under monitor list:

    8:50:54 PM: *#4*4*0*0269## (measure 26.9°c on zone 4)

    8:50:54 PM: *#4*4*12*0200*3## (setpoint  20°c on zone 4 mode Generic)

    8:50:54 PM: *4*0*4##

    8:50:55 PM: *#4*4*14*0200*3## (expected 20°c on zone 4 mode Generic)

    8:50:55 PM: *#4*4*13*00## (local offset knob value 0 on Zone 4)

    8:51:00 PM: *#4*2*19*5*5## (valve zone 2 cooling OFF Fan Coil heating OFF Fan Coil)

    8:51:00 PM: *#4*2*19*0*0## (valve zone 2 cooling OFF heating OFF)

    8:51:06 PM: *#4*2#2*20*5##

    8:51:06 PM: *#4*2#1*20*5##

     

     




    User
    nguyenvantruc
    Role
    Installer
    7 posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.