Home Page Forums Community International Archive Automation Motion Sensor False Toggle ON

Automation
Motion Sensor False Toggle ON

This topic contains 7 replies, has 3 voices, and was last updated by  eugeneduffy 03/08/2015 at 17:36.

2
7
791
  • Verified

    Hi,

    I have a 048820 installed in a small project to turn on and off an actuator automatically. I have also installed a master off command (067553 calling as scenario in a F420) at the entrance of the house. The problem I am having is that when the master off switches everything off the actuator that the 048820 is controlling will toggle the lights on again after it times out from the last presence detected. Normally I would track an actuator with the MH200N but as this is a small project and I dont have one installed.

    Are there any settings in the 048820 that can stop this ON function after an OFF command is sent?

    Thanks

    Eugene




    User
    eugeneduffy
    Role
    Wholesaler
    74 posts
    Verified

    Hi, franking speaking I don't understand which is the problem you have.

    Do you need that, after a manual OFF it restart immediately the AUTOMATIC function.

    Regards




    User
    BT_Marcog
    Role
    Legrand/BTicino Group
    4593 posts
    Verified

    Hi Marcog,

    Let me explain a bit better

    1. The kitchen light is off.

    2. Motion detected from the 048820 turns the light on for 15minutes

    3. 10 minutes after the detected motion the user leaves the house and presses the master off command 067553 and the kitchen lights turn off.

    4. 5 minutes after the master off command was pressed and the house being vacated the kitchen lights turn back ON again automatically and now stay ON.

    When I use the 048820 with the 048851 I do not have this issue . Do you know of any work around for this?

    Thanks for your help.

    Regards

    Eugene




    User
    eugeneduffy
    Role
    Wholesaler
    74 posts
    Verified

    Hi Eugene

    Do you know for sure the ON request is coming from the 048820?

    Regards

    Rich




    User
    rphopkins
    Role
    Legrand/BTicino Group
    566 posts
    Verified

    Hi Richard,

    I think the above scenario was causing the light to come back on when the sensor timed out! Something not right there but I know the 002645 has some issues, maybe this is one of them?

    Once this scenario is removed everything works well. The scenario id for above is 8 when I look in the web pages. Can you tell me what is what 39 for?

    30/07/2015 20:12:57 192.168.1.24 MON RX Data received *#13**22*20*11*56*000*04*30*07*2015##
    30/07/2015 20:13:08 192.168.1.24 MON RX Data received *1*34*24##
    30/07/2015 20:13:08 192.168.1.24 MON RX Data received *17*1*8##
    30/07/2015 20:13:08 192.168.1.24 MON RX Data received *1*1000#1*24##
    30/07/2015 20:13:08 192.168.1.24 MON RX Data received *1*4*24##
    30/07/2015 20:13:08 192.168.1.24 MON RX Data received *17*2*8##
    30/07/2015 20:13:09 192.168.1.24 MON RX Data received *#1*24*1*120*0##
    30/07/2015 20:13:14 192.168.1.24 MON RX Data received *1*0*24##
    30/07/2015 20:13:14 192.168.1.24 MON RX Data received *#13**22*20*12*26*000*04*30*07*2015##
    30/07/2015 20:13:44 192.168.1.24 MON RX Data received *1*39*24##
    30/07/2015 20:13:44 192.168.1.24 MON RX Data received *17*1*8##
    30/07/2015 20:13:44 192.168.1.24 MON RX Data received *1*1000#0*24##
    30/07/2015 20:13:44 192.168.1.24 MON RX Data received *1*0*24##
    30/07/2015 20:13:45 192.168.1.24 MON RX Data received *#13**22*20*12*56*000*04*30*07*2015##
    30/07/2015 20:13:45 192.168.1.24 MON RX Data received *17*2*8##
    30/07/2015 20:13:45 192.168.1.24 MON RX Data received *#1*24*1*120*0##
    30/07/2015 20:13:45 192.168.1.24 MON RX Data received *17*1*8##
    30/07/2015 20:13:46 192.168.1.24 MON RX Data received *17*2*8##
    30/07/2015 20:13:46 192.168.1.24 MON RX Data received *#1*24*1*120*0##
    30/07/2015 20:14:15 192.168.1.24 MON RX Data received *#13**22*20*13*26*000*04*30*07*2015##
    30/07/2015 20:14:45 192.168.1.24 MON RX Data received *#13**22*20*13*56*000*04*30*07*2015##
    30/07/2015 20:15:15 192.168.1.24 MON RX Data received *#13**22*20*14*26*000*04*30*07*2015##

    The light is still on.

    Thanks Richard.




    User
    eugeneduffy
    Role
    Wholesaler
    74 posts
    Verified

    I used imyhome to turn the light off at 20:13:14




    User
    eugeneduffy
    Role
    Wholesaler
    74 posts
    Verified

    Hi Eugene

    What 34 = Movement

    What 39 = End Of Movement

    I'm not sure why this frame would trigger scene 8

    Regards




    User
    rphopkins
    Role
    Legrand/BTicino Group
    566 posts
    Verified

    Hi Richard,

    I removed scene 8 and this stop the light turning back on when the sensor timed out.

    Thanks for your help.

    Regards,

    Eugene.




    User
    eugeneduffy
    Role
    Wholesaler
    74 posts
Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.