This topic contains 4 replies, has 2 voices, and was last updated by  rphopkins 05/11/2013 at 09:59.

1
4
459
  • Verified

    Dear All concern,

    In Thailand bticino's Zigbee is very new .

    1.What i need to know is about flush mounting radio actuator,Is it possible to work as 2 ways switch (Control same light) by 2 of flush mounting actuator such as LN4591,LN4592 or dimmer LN4593. not by a battery version.

    2. Where can i find technical guide and zigbee forum?

    Best regards,




    User
    yusufraksalam
    Role
    Legrand/BTicino Group
    26 posts
    Verified

    Hi Yusuf

    Yes this is possible, using the Push and Learn procedure you can add many devices (commands/actuators/dimmers) into the same group. You can even use mains devices without load attached just the act as commands!

    Technical Guides can be found on the intranet or dialeg operation manuals.




    User
    rphopkins
    Role
    Legrand/BTicino Group
    566 posts
    Verified




    User
    rphopkins
    Role
    Legrand/BTicino Group
    566 posts
    Verified

    Thank you for your answer.

    But some more question.

    1. "Main device" is the only actuator that has Line and Neutral for power supply ,Is'n it?

    2. What i need to know as described in the technical guide P93  "How to associate the actuator to another actuator"

        Please explain more about this procedure.

    3. Do you have any link to Zigbee forum?




    User
    yusufraksalam
    Role
    Legrand/BTicino Group
    26 posts
    Verified

    Hi Yusuf

    1. You are right, in a Zigbee network there must be one Coordinator which is always a power device, like a dimmer or actuator. This device is responsible for creating the network.

    2. Please see attached guide (edit – Sorry to large to attach)

    3. Not that I'm aware of.

     




    User
    rphopkins
    Role
    Legrand/BTicino Group
    566 posts
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.