Home Page Forums Community Italia FAQ MyOpen Community Configurazione autonoma interruttori/punti luce

MyOpen Community
Configurazione autonoma interruttori/punti luce

Ce sujet a 3 réponses, 2 participants et a été mis à jour par  sxpertle, le 25/06/2019 à 11:23.

0
3
306
  • Verifié

    Buongiorno a tutti,

    ho comprato casa nel 2015 e l’elettricista mi ha detto che l’abitazione è dotata di impianto domotico BTicino.

    Ha fatto lui la configurazione dell’accoppiamento interruttori/punti luce e se devo cambiare qualcosa, devo chiamarlo.

    Lui ha usato un pc connesso a una presa particolare, che vedete in foto:

    Esiste un cavo/software acquistabile per permettermi di fare la configurazione autonomamente o devo effettivamente chiamare l’elettricista?

    Grazie,

    Alberto




    Utilisateur
    albertovaghi
    Rôle
    Utilisateur Final
    2 posts
    Verifié

    your plug is : https://catalogo.bticino.it/BTI-N4291-IT
    appropriate connector is : https://catalogo.bticino.it/BTI-2120N-IT
    you will also need an F454 or a myhomeserver1 to use as a gateway.
    I recommend you open the thing to check this plug is connected to the Bus (you should have a small blue and white wire, also connected to the command device on the right.)
    then, get myhomesuite for your windows PC, and you should be all set

     




    Utilisateur
    sxpertle
    Rôle
    Intégrateur de systèmes
    606 posts
    Verifié

    Thank you very much for your prompt answer! I have a question: if I buy the BTI-2120N-IT should I connect it via USB to the computer?




    Utilisateur
    albertovaghi
    Rôle
    Utilisateur Final
    2 posts
    Verifié

    sorry for the late answer, the forum was broken for a while.
    the BTI-2120N-IT is a 2 prong plug, it has nothing to do with USB.
    As I said, if you open this receptacle, you should probably see that the bus cable is wired to the wall plug on the left.
    you thus have an SCS-Bus (not USB) there.
    you need to connect a bus to ethernet gateway, such as an F454 there.
    you will then be able to use myhome_suite through this F454 gateway to reprogram your system




    Utilisateur
    sxpertle
    Rôle
    Intégrateur de systèmes
    606 posts
4 sujets de 1 à 4 (sur un total de 4)

Vous devez être connecté pour répondre à ce sujet.