Home Page › Forums › Community International › Archive › Thermoregulation & energy management › How to control air conditioner through 88301 and iMyhome
Ce sujet a 4 réponses, 2 participants et a été mis à jour par vuongxuanphuc, le 26/08/2015 à 11:08.
I see in iMyhome have a command to control air conditioner. So I want to know what a command to control the air conditioner through 88301. Ex I download command to 88301 with ID 1: On. ID2 :Off .
I have the IR device at home and I use iMyHome to control my Split.
iMyHome has no dedicated object for the IR device.
Anyway there is a solution:
If 88301 is in basic mode, consider it as a F420 (Scenario Module), so use the scenario page to contro your Split.
If 88301 is in advanced mode, you can use the "command object" to control your split.
You have to manually insert the OpenWebNet message for the function you want to control (as I have done in my house).
Check this topic for the OpenWebNet messages:
thank Lozenzo I have download command to the 88301. If I want use F420 to control air conditioner. How take it
I believe you configure the 88301 in basic mode.
This means that 88031 works as a F420.
F420 doesn't activate scene of another F420 (it's looks normal)
You have to use a pushbutton as scene command to activate a scene of 88301 (scene=IR command).
thank Lorenzo I have done it. Thank you
Vous devez être connecté pour répondre à ce sujet.