My burglar alarm system started to fail everyday at 18h25, every single day at… 18h25.
The alarm is:
11: int DIN INT CONTACT 1
How can I solve this? What is this? Why everyday 18h25?
This way, the alarm cannot be ativated.
I’ve checked all sensors and sirens. It seems everything ok.
NT4433N presence IR detector can operate in ECO and AUTO mode. How to switch between modes? No remote command to configure it is available.
avilelas replied to the topic Summer/Winter time selection in the Daikin Altherma System in the forum Thermoregulation & energy management il y a 3 ans et 3 mois
Another F430/2 module you mean?
The central control unit, when Summer/Winter time is selected, sends an automation signal to the Daikin machine.
The F430/2 I have inplace has a spare channel (CH2). Can it be used for this automation?
The module 347400 is not compatible with these analogic HD cameras.
It doesn't work.
Is there any other similar module but for this kind of cameras?
Or F441 and the Legrand Domotic system/technology (2Wire) just doesn't support analogic HD cameras?
Update. Good news… not yet…
So I have the DVR Legrand 4 307 53 with 4 channels BNC input and, among others, BNC output.
In the TS 10'' and atMyHome app, the DVR output is now possible to see. The 347400 works correctly.
However, now I don't have images from the cameras in the DVR!! So the output is…En afficher davantage
Let's hope then.
Next week I will test it when the it arrives.
No. My cameras output are BNC's. There is not a problem.
The DVR that is being suggested by my LEGRAND vendor is the BTICINO 391514
http://www.download.bticino.it/…/49789.pdf (page 54).
It has 4 coaxial input for the cameras, 1 BNC outlet to connect the 347400 module and PAL video signal.
I think it will work for the F441 and TS10''
What's your oppinion?
At this moment, based on your explanation, it's the only way to work with these particular cameras. I have four CCTV cameras.
The very first approach was to connect all the cameras to the F441, each one with one 347400. However, due to the characteristics, digital signal, there is no (simple) way to convert each signal to SD PAL.
Then, the DVR…En afficher davantage
Thank you sxpertle
That is now clear for me.
In order to try to solve the problem I acquired the following converter:
however, according to your explanation, this converter still have the problem of not have SD PAL output. Do you agree? In fact, it didn't work either.
The alternative you mention,…En afficher davantage
The cameras are HIKVISION Full HD. They are digital cameras but with coaxial output.
The DVR only has HDMI output. I acquired a converter HDMI–> Coaxial but it also doesn't work.
I see two options:
#1 – install a NEW DVR with coaxial output to connect to 347400
#2 – connect the DVR HDMI…En afficher davantage
In the situation cameras are directly connected to Domotic, the connections between F441 and devices are:
EP1 connected to TK1
EP2 connected to TK2
Camera 1, with configurator nÂº 2, connected to TK3
Camera 2, with configurator nÂº 3, connected to TK4
In the situation cameras are directly connected to DVR, the connections between F441 and dev…En afficher davantage