Home Page Forum Community International Archive Scenario Scheduler Activating scenarios after downloading into MH200N

Scenario Scheduler
Activating scenarios after downloading into MH200N

Questo argomento contiene 4 risposte, ha 4 partecipanti, ed è stato aggiornato da  mr-sk 13/12/2016 at 10:27.

0
4
782
  • Verificato

    Hi!

    I was wondering whether a scenario gets already active after been downloaded into MH200N (from TiMH200). The reason that made me ask the question is that the scenarios seem to not work even I checked my scenarios active in TiMH200. They start working after I go to web interface and click there a few times.

    Is this a normal behavior or I am missing something? I was also wondering which color (light or dark) means an active scenario in web interface?

    Thanks.




    Utente
    vomus
    Ruolo
    Entusiasta
    24 posts
    Verificato

    Hi, the complitely restart of the MH200n takes some minutes (3-5 minutes at least) before that everything is ready.

    This is the reason.

    Once that in the web pages alla the scenarios are loaded it menas that the device is ready.

    regards




    Utente
    BT_Marcog
    Ruolo
    Legrand/BTicino Group
    4593 posts
    Verificato

    It took WAY MORE than 3-5 minutes. I have scenarios that work at sunset/sunrise and waited the whole night before it should have been executed.

    I also do not quite understand what a light/dark color on the buttons mean. Does the darker color means "on" and lighter "off"?




    Utente
    vomus
    Ruolo
    Entusiasta
    24 posts
    Verificato

    I Have the same experience




    Utente
    amcmx
    Ruolo
    System Integrator
    5 posts
    Verificato

    hi, once i had the problem a scenario was deactivated and so it could not be started. so i activated it in de web browser. but normally all scenarios are activ and start working automatically.

    i did a screenshot but i cannot post it here, sorry, so:

    – if a scenario is deactivated then the "x" is dark grey

    – if a scenario is activated the "x" is light grey and the check is dark

    – if a scenario is executed the green play button is blinking

    hope that helps 🙂

    best regards, stefan




    Utente
    mr-sk
    Ruolo
    Entusiasta
    67 posts
Stai vedendo 5 articoli - dal 1 a 5 (di 5 totali)

Devi essere loggato per rispondere a questo argomento.