Scenario Scheduler
MH202 restarting

Questo argomento contiene 3 risposte, ha 3 partecipanti, ed è stato aggiornato da  aalbanese 25/11/2016 at 18:38.

0
3
962
  • Verificato

    Hi,

    I've noticed, that my MH202 device reboots independently even though there was no power failure.

    Those reboots happens aprox. every two days and therefore all scenarios wich I set to run "at start up" are triggered (lock actors, reset variables etc.).

    Because these scenarios are intended to run after a power failure I have to manual rework the settings (unlock actors etc.).

    My questions in this context are:

    – Why does the device restart automatically?

    – Is there a way to prevent the device from rebooting?

    Thanks!




    Utente
    hleopoldseder
    Ruolo
    Studente
    19 posts
    Verificato

    Hi, due the fact that maybe the problem need a deeply analysis I'm inviting you to contact our local technical support-

    http://www.professional.legrand.at/…/verkaufsservice.html

    Regards




    Utente
    BT_Marcog
    Ruolo
    Legrand/BTicino Group
    4593 posts
    Verificato

    Hi,

    since I've upgraded the firmware from version 1.0.13 to 1.0.21 it seems to work, no reboots for the last 6 days :-).

    Regards




    Utente
    hleopoldseder
    Ruolo
    Studente
    19 posts
    Verificato

    Rebooting the system frequently is  a good practice to reasssure that every thing will work correctly after  a power failure. Bticino recommends to test the GFI (Salvavita o differenIale) once a month.




    Utente
    aalbanese
    Ruolo
    Consulente
    1980 posts
Stai vedendo 4 articoli - dal 1 a 4 (di 4 totali)

Devi essere loggato per rispondere a questo argomento.