Thank You very much sxpertle for the help, I am getting *15 as well as *25 code(I will let you know about f420(*0 Code) once i receive and configure it.) at my 3rd party device, so now i can process them.
I am getting data like
1> *15*1*15## (who = CEN, Button NO = 1 , AreaPoint = 15 (i have configured my keypad on 15) )
2>*15*01#1*15## (no…[Leggi tutto]
I am getting rest of the data other than *25 command at my 3rd party device . Please look at the link if i have not done programming properly .
I am getting rest of the data other than *25 command at my 3rd party device .
In Start i have selected CEN Plus 1 button short press and in action i have defined lighting level of actuators. But it is not sending me any command from F454, when i monitor internal process through MySweet app i can see that *25 command is being executed but f454 is not sending it out. Here is the link for what i have done in scene…[Leggi tutto]
While configuring scenes in MH202 I have selected CEN+ button short press, in action i have selected my actualtors and dimmer at full and added SceneControl command to turn other scenes off, Where i find that action which can help F454 to transmit scene on off code?
and how we can achieve this ? Is there any document which explains this whole procedure ?
I am using web server in between my 3rd party and legrand i.e. F454 . which is sending feedback command to my 3rd party device. but in that i am not getting any command that indicates that scene is being triggered.
thank you so much for explanation ,
Can i get feedback on button press of LG-067533 to my 3rd party device ? I have set scene on button press where scenes are made in MH202 (CEN) Scenario Controller.
I have a simple query that will webserver provide me with scene triggered feedback as soon as button is pressed.
Can anyone let me know what below codes means ? I got these codes in feedback to 3rd party device on button pressed of legrand keypad
And will i able to get feedback on 3rd party device while any scene is being triggered from legrand keypad ?
How can i establish status session between legrand and 3rd party device controller ?
will this provide automated feedback to my controller when any scene or individual load is triggered from legrand family keypad?
while sending command session, event session and “*#1*0##” command to web server on 20000 port but in return i am only getting “ACK” message only nothing else. while i am monitoring the session from my laptop through MySweet Application i can observe so many feedback command while sending “*#1*0##”.
What could be the potential reason for that ?…[Leggi tutto]
I am developing a driver of legrand system for ELAN System , i am sending out command on port no. 20000, i want to know that when webserver replies back to 3rd party device over TCP/IP on which port f454 replies back? i am sending command like “*#1*0##” , i am sending “*99*0#” on every 28th second and at first i am sending *99*1# only one t…[Leggi tutto]