Azienda/SocietàBlue Networks Technologies
wrote my own
il n’y a aucune raison matérielle, les F401 et F411U2 étant tres proches sur le plan matériel. il n’y a aucune raison logicielle non plus. a moins que la détection de fin de course detecte une sur-consommation du moteur en descente ?
sorry for the late answer, the forum was broken for a while.
the BTI-2120N-IT is a 2 prong plug, it has nothing to do with USB.
As I said, if you open this receptacle, you should probably see that the bus cable is wired to the wall plug on the left.
you thus have an SCS-Bus (not USB) there.
you need to connect a bus to ethernet gateway, such as an…[Leggi tutto]
your best guess would be to write your own software and a raspberry pi or something
sxpertle replied to the topic How to send commands on the F420 module by Open Web Net? in the forum OpenWebNet 8 mesi, 3 settimane fa
you will find a python module to respond to the password request here :
your plug is : https://catalogo.bticino.it/BTI-N4291-IT
appropriate connector is : https://catalogo.bticino.it/BTI-2120N-IT
you will also need an F454 or a myhomeserver1 to use as a gateway.
I recommend you open the thing to check this plug is connected to the Bus (you should have a small blue and white wire, also connected to the command device…[Leggi tutto]
sxpertle replied to the topic does this mean that this address is correct A:10 PL:1 in the forum OpenWebNet 9 mesi, 1 settimana fa
Sadly, it seems like the LegrandGroup is not investing AT ALL in community support… and documentation updates seem to be the least of their worries.
They recently bought netatmo, and it shows, everything appears to be going to some sort of cloud thing now…
I am slowly pondering moving to some other solution such as loxone…
hah !, j’avais pas compris ca…
je comprends mieux certaines choses.
bon. une chose est sure, c’est bien gentil d’avoir acheté netatmo, et j’suis sur que c’est bien, MAIS:
- les solutions radio c’est merdique
- l’impossibilité de controler le truc localement ca limite fortement l’utilité quand t’habite au fin fond de la cambrousse et que ton in…
la connessione sta andando bene
il gateway ti chiede di inviare la password aperta crittografata.
Ho già fatto i moduli giusti per tutto questo.
li puoi trovare qui:
as an alternative, you could also use a pair of F401
they have several lines of smart wall switches and dimmers that connect to the netatmo platform, and there’s a sort of open API that you can access here https://developer.legrand.com/
however, the netatmo products can’t be accessed locally if your internet connection is down, which is why myHome is still a better offering.
IMHO the gateway should…[Leggi tutto]
you can use an F411/4, as 2 separate motor controllers, one for up/down, and one for slat tilting
that sequence should be *1*1*1001##
sxpertle replied to the topic About updated 573962 firmware corrupted configuration file(Extra) in the forum MyOPEN community 9 mesi, 3 settimane fa
there is no “MyHomeSuite 4.0” here : http://www.homesystems-legrandgroup.com/BtHomeSystems/home.action
non e possibile aggiornare le firmware
un nouveau modele d’ecocompteur sans connection SCS est prévu a partir de juillet 2019…